4x 2 Inch 8x6.5 to 8x180 Wheel Spacers Adapters For GMC Sierra 1500 2500 3500 HD

  

1 Thickness: 2 / 50mm. 2 Vehicle Bolt Pattern(PCD): 8x6.5 / 8x165.1mm. 3 Wheel Bolt Pattern(PCD): 8x180mm. 4 Hub Diameter: 126.15mm / 4.97. 5 Thread Size: 14x1.5 / M14x1.5 / 14mmX1.5.

Note:Please make sure you take the proper neasurements gefore purchasing. Package include: 4Pcs Wheel Spacers Adapters. What should I pay attention to during installation? 1 Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel. 2 Make sure that the wheel bolts being used are of the appropriate length, not too long or too short. 4x 2 Inch 8x6.5 to 8x180 Wheel Spacers Adapters For GMC Sierra 1500 2500 3500 HD.

Please make sure you take the proper neasurements gefore purchasing. 3 DO NOT proceed if both of the wheel spacer do not fit. 4 Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.

5 Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs). 6 Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.

7 All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles. 8 Alignment is necessary after installation, this will prevent any wobble and vibration from occurring. How to measure the fender gap to choose suitable thickness?

1 Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip. 2 Please take multiple measurements and use the smallest data point. (The most closest spot may be at the front or rear edge of the fender).

The maximum recommended spacer thickness= the smallest gap - 3/8(10mm). Your Factory wheel studs may extend past the surface of the wheel spacers.

In this case you will need to: 1 Shorten the factory studs. 2 The wheels need to have the open slots (cavities) between mounting holes. 8x6.5 to 8x180 Wheel Spacers Adapters 8 Lug. 2 or 50mm Thick Wheel Spacers. 2 or 2 Inch or 50mm. 14mm x 1.5 or 14x1.5 or M14x1.5. 8x6.5 or 8x165.1mm. High Grade T6-6061 Billet Aluminum. CNC Machined Polished Aluminum Finish. The note there will NOT be read. The images shown are not the actual item and are for your reference only. OR, you may choose to have a replacement.

FEEDBACK IS VERY IMPORTANT TO US. Pair For 99-07 Ford F250-F550 Super Duty Towing Mirrors Power Heated Turn Light. Fits 2002-03 Nissan Maxima & 2002-04 Infiniti I35 (4) Struts Shocks Coil Springs.

2 Rear Trunk Liftgate Tailgate Hatch Lift Support For 99-04 Suburban Tahoe Yukon. For 98-02 Toyota Corolla Interior Front Rear 4Pcs Door Handles Inside.

Wheel Stem Air Valve Cap. 4 Pcs wheel hub bearing. Leveling kit + struts shocks. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Wheels, Tires & Parts\Other Wheel & Tire Parts". The seller is "top-liftsupport" and is located in this country: US.

This item can be shipped to North, South, or Latin America, Australia.

1. Manufacturer Part Number: TOP81958901adv
2. Brand: top-liftsupport
3. Type: Wheel Spacers
4. Interchange Part Number: 8x6.5 to 8x180 Wheel Spacers Adapters 8 Lug
5. Other Part Number: 2\
6. Superseded Part Number: fits 2001-2010 2002 2004 2005 2006 Chevrolet Silverado 2500 HD
7. Thickness: 2\
8. Thread Size: 14mm x 1.5 or 14x1.5 or M14x1.5
9. Stud Grade: 10.9
10. Vehicle Bolt Pattern: 8x6.5\
11. Wheel Bolt Pattern: 8x180mm
12. Material: High Grade T6-6061 Billet Aluminum
13. Surface Finish: CNC Machined Polished Aluminum Finish
14. Color: Silver
15. Placement on Vehicle: Left, Right, Front, Rear
16. Vehicle Fitment: For Chevrolet GMC Hummer
17. Center Bore Size: 126.15mm
18. Hub Centric: No
19. Quantity: 4pcs
20. Warranty: 1 Year